FAQs for Consumers

What to know about building codes

What are residential building codes?

Residential building codes are construction guidelines for how to build homes to meet minimum legal requirements. They have been in use in the United States for more than 100 years when major cities began to adopt and enforce building codes in response to large fires in densely populated urban areas. While early building codes were in place to reduce fire risk, today's building codes have expanded to address many hazards, both ordinary and catastrophic, and serve as the minimum acceptable standards to protect the health, safety, and general welfare of building occupants.

Why are building codes important?

Modern model building codes reflect the best available building practices and are continuously updated to reflect innovation in building design, products, methods, and technologies as well as research insights and lessons learned after disasters. Codes should be consistently enforced by well-trained professionals as they are essential to creating disaster-resilient communities that protect health, safety, and economic well-being. Weak building codes or lax enforcement create a burden on homeowners and communities through property damage, higher insurance premiums, insurance deductibles, loss of use, and missed economic opportunities. According to the Federal Emergency Management Agency (FEMA), structures built to higher standards are 77 percent less likely to be damaged.

How do building codes work?

Building codes are either prescriptive or performance-based. Performance codes provide a technical objective, which leaves the method of achieving the objective up to the architect/engineer and builder. Prescriptive codes are more like recipes and specify the method for designers and builders to achieve the objective. Some model codes, like the International Residential Code (IRC), have both prescriptive and performance-based provisions, although the IRC is a prescriptive-oriented code.

Do stronger building codes make a difference when disaster strikes?

People taking refuge in homes built to modern, model building codes have the best chance of survival during disasters, and codes provide increased property protection as well. For example, wind-resistant building practices like those included in the latest IRC improve building performance during hurricanes and tropical storms, as well as tornadoes, through enhanced roof-to-wall and wall-to-foundation connections, opening protection like shutters, impact-resistant garage doors, and more. According to FEMA, structures built using codes are 77% less likely to experience damage. Further, a study entitled Economic Effectiveness of Implementing a Statewide Building Code: The Case of Florida found that the statewide Florida Building Code reduced Florida windstorm losses by up to 72% and that it results in 5 dollars in losses saved to every 1 dollar of added costs with a payback period of approximately ten years.

Does it cost more to build to modern, model building codes?

Building codes may introduce a modest increased cost at the time of construction; however, the cost is offset by savings delivered throughout the lifetime of homeownership. Savings may include enhanced durability, energy efficiency, life safety, avoided disaster losses, and more. When the modest cost is included as part of a mortgage, it may amount to as little as pennies per day, making the time of new construction the most cost-effective and efficient means of strengthening buildings. That is why it is critical for communities to adopt, enforce, and update codes on a continuous basis. Furthermore, according to a recent study by the National Institute of Building Sciences, buildings designed to meet the 2018 model building codes developed by the International Code Council (ICC) result in a national benefit of $11 for every $1 invested.

How do building codes save money on homeowners insurance?

Communities with strong building codes save by preventing physical damage and economic losses, but they also qualify their residents for lower homeowners and flood insurance rates because they score favorably on the ISO Building Code Effectiveness Grading Schedule (BCEGS). Building code strength and/or weakness is typically factored into individual insurance premiums as well.

Who is responsible for adopting and enforcing building codes?

Depending on the state or territory, state and/or local and tribal officials are responsible for adopting and enforcing building codes. Building code adoption and effective enforcement serve as crucial lines of defense against geologic and severe weather events as every community faces some type of risk from earthquakes, floods, hurricanes, tornadoes, wildfires, or other disasters.

What is the process and timeframe for developing model building codes?

The International Code Council uses a consensus process to develop the IRC for One- and Two-Family Dwellings. The IRC is revised every 18 months, and new editions are published every three years. Most United States jurisdictions that adopt a residential code adopt an edition of the IRC, sometimes with amendments.

How can I support the adoption of model building codes and standards in my community?

Contact your state and/or local elected officials, building department, or permitting office to learn how you can support adoption and enforcement of modern building codes and standards in your community.

Can this website tell me what building code was followed to build my home?

This website will indicate whether a code is adopted currently, so the information may vary based on your home's age. You can verify home age by checking your local property tax appraiser records and then contacting your building department or development services office to determine the code followed, if any. Be sure to verify that your home was permitted under the code in effect for that month/year as developers and home builders sometimes secure permits in advance of a code update. In that case, the construction requirements might follow the older version of the code.

My local officials advise that I may not make alterations to my home because of floodplain regulations, yet this website says we don’t have a code. Why?

It is possible that a community without a residential building code must still follow floodplain regulations. In that case, construction and siting would have to comply with a different set of rules for construction allowable in the designated Special Flood Hazard Area (SFHA). Floodplain regulations can overlap with some details included in building codes, such as building height, but floodplain regulations also address home location, permissible use of the first floor, and more.

My municipality requires annual fire code inspections for my business, but this website says we don’t have a code?

A jurisdiction may not have adopted a residential building code but may still have a separate fire code that requires life safety features such as smoke alarms, fire extinguishers, and accessible entry and exit doors.

What is the difference between the code status shown on this website and a local ordinance?

This website lists the adoption status of the International Residential Code by the jurisdiction in part or whole. The International Residential Code is the model residential building code published by the International Code Council through a comprehensive, national, three-year process to identify and incorporate the latest science, research, and product innovation into homebuilding. A local ordinance is a law, rule, or regulation on topics specific to the city, county, town, or area on wide-ranging issues from tree trimming and noise pollution to building codes. Local ordinances or state laws that require only part of the International Residential Code or that do not include the current International Residential Code, may not require the construction of strong, safe, durable, and energy-efficient homes.

Where can I get a copy of the International Residential Code?

The International Code Council provides free, read-only versions of the International Residential Code on its website with other options for purchase. Contact your local building department for a copy of any adopted residential code or local ordinance.

For contractors and code officials